Single Corner Shelf
Overall size is 15" wide x 7 1/2" deep
Includes metal bracket
Installation Instructions
-
Mark holes in bracket on wall panel. (Make front holes 1/16 lower than back holes to allow drainage)
-
Drill 3/16" holes and insert plastic anchors.
-
Apply silicone sealant to sides of flanges of bracket. Place bracket smooth side up onto the wall and insert screws into anchors. Tighten.
-
Test fir the shelf over bracket and sand as needed to fit walls.
-
Apply silicone seanant on top of bracket and edges of Durasein shelf.
-
Press shelf onto bracket and against wall.
-
Clean off excess seanant and wipe with denatured alcohol.
-
Allow 4 hours before use.
​
Triple Corner Shelf
Overall Size 5.4" x 15.25"
Installation Instructions
-
Sand back corner as needed to fit wall.
-
Clean wall and back of shelf with denatured alcohol.
-
Apply 1/4" bead of silicone sealant to the sides of the shelf about 3/8" inset from edges. Apply 3 dabs of silicone sealant on each side panel.
-
Apply 2 dabs of hot melt adhesive on each side.
-
Press shelf unit firmly into place and hold in position until hot melt cools.
-
Wipe excess adhesive from perimeter of shelf.
-
Wipe with denatured alcohol.
